PLDT USERNAME AND PASSWORD (February 22, 2020 update)

username: admin

password: 1234

Okay! So a lot of you are telling me that this is not working? It's not going to work if you don't do the hard reset.

If you are willing to reset your password to log in to PLDT admin, then you may proceed to the following steps. If you're not willing to, then you need to remember your last password used.

PLEASE READ CAREFULLY!

1. HARD RESET YOUR ROUTER. You need a pin to hard reset your router. The hard reset button is located beside the power button and you need a pin to click it. You need to wait at least 2 minutes to successfully reset your modem. Wait until all the lights turn off except the power button. Once they all turned off, wait until all the lights turn on again. When all the lights turn back normally, then the hard reset process is finished.

2. GO TO https://192.168.1.1/login.html type in username admin then password 1234.

3. ASSIGN NEW PASSWORD. There's no other way to re-assign your old password for PLDT Admin. First, you need to create a new password for the PLDT admin. Please note that your password should meet the following requirements:

a. Capital Letter/s

b. Small Letter/s

c. At least 12 characters

d. Special character/s

e. Number/s

If you don't meet with these requirements, you are not able to fully access PLDT admin.

4. CREATE NEW WIFI PASSWORD/S. You need to create new WIFI passwords to fully access PLDT Admin. You can fully access PLDT admin such as restricting devices, adding more WIFI connections as well as creating new WIFI passwords. You can also limit the number of device per modem and you can also view all the devices connected to your WIFI.